All Categories

EPS Sandwich Panels

EPS Sandwich Panels

Home /  Products /  Sandwich Panels /  EPS Sandwich Panels

EPS Sandwich Insulated Wall Panel Color Steel Foam Core Wall Cladding

Economical EPS foam-core color steel insulated wall panel; 50-150mm thick, 0.3-0.8mm PPGI face, tongue-and-groove joint; MOQ 1 order; strapped bundles; lead time 7-15 days.

  • Overview
  • Specifications
  • Applications
  • Advantages
  • Service & After-sales Process
  • FAQ
  • Recommended Products
Overview

Our EPS sandwich insulated wall panel is the value-engineered choice for economical wall cladding. Two rigid color-coated steel faces bond to a lightweight expanded polystyrene foam core on a continuous lamination line, producing a flat, light, weathertight panel that screws quickly to steel purlins. The tongue-and-groove joint gives a neat, straight wall with good wind and rain resistance, and the broad RAL color range lets the building match any corporate or industrial scheme.

The panel is produced in 50-150mm thickness, with steel gauge from 0.3mm to 0.8mm, a 950mm effective width, and any length up to transport limits. The EPS core provides good general thermal insulation, while the PPGI/PPGL skin resists weathering and corrosion. It is ideal for workshops, warehouses, temporary buildings and low-cost commercial walls where cost is the priority. Edge trims, flashings, windows and doors are supplied to match.

As the direct manufacturer, we control every step from steel coil to finished panel, offering factory-direct wholesale pricing, consistent dimensions and fast lead times. Production inspection checks bond strength, core density, flatness and color before packing. For an affordable, fast-to-install insulated wall, the EPS sandwich wall panel is the dependable choice.

The panel is installed horizontally or vertically on steel purlins with self-drilling screws and matching washers, and the tongue-and-groove joint gives a weathertight straight line without visible fasteners on the face. On site, it can be cut with standard shears or a circular saw with a fine blade, and off-cuts are kept to a minimum because panels are produced to ordered length. After erection, matching trim, windows and doors are fixed with the same fixing schedule, and the outer skin is simply hosed or wiped to keep its color over the years. Buyers often pair these wall panels with the matching EPS roof panel for a uniform envelope. With correct fixing and flashing, the wall will remain square, sealed and insulated through seasonal temperature movement, and spare panels and trims can be reordered by model for repairs. Our engineers can review a simple sketch of openings and corners and confirm the fixing and accessory list before production, so installation goes smoothly and the finished wall looks as neat as a reference project.

As the direct manufacturer, we produce these panels on our own continuous lamination line, inspect every batch for bond, dimensions and surface finish, and export to more than eighty countries. We accept trial orders and sample panels, quote within twenty-four hours, and support FOB, CIF, CFR, EXW and DDP shipment. Send us your drawing, opening schedule or room requirements and we will return a tailored panel schedule with thickness, width, length, color and the matching accessories, so your project is specified correctly before production begins. Every order is backed by pre-sale consultation, production photos, supervised loading, installation guidance and a dedicated after-sales engineer who responds within twenty-four hours, with spare trim, gaskets and fixings held for reorder. Whether you are a contractor, a distributor or an end owner, you buy directly from the mill rather than through a trading company, which means consistent quality, shorter lead times and honest pricing on every shipment, large or small.

Specifications

Product: EPS Sandwich Insulated Wall Panel Color Steel Foam Core Wall Cladding

PROJECT SPECIFICATIONS PROJECT SPECIFICATIONS
Model EPS-W-950 (wall) Core Expanded polystyrene (EPS)
Thickness 50-150mm Effective width 950mm
Steel face PPGI/PPGL 0.3-0.8mm Finish Smooth / embossed / stucco
Joint Tongue-and-groove Length Custom to transport limit
Colors Any RAL Insulation General thermal
Fixing Screws to purlins Accessories Trims, flashings, doors
MOQ 1 order (few hundred sqm) Lead time 7-15 days
Packing Strapped, edge-protected Loading 20GP/40HQ
Trade terms FOB/CIF/CFR/EXW/DDP Certification ISO 9001 / CE support

Applications

The EPS wall panel suits industrial workshops and warehouses, temporary and prefab buildings, modular and container houses, low-cost commercial facades, and agricultural and ancillary buildings. It is also used as partition walls, site offices, worker camps and renovation cladding where budget matters and a Class-A fire rating is not required.

Advantages

1. Lowest installed cost: EPS core and factory-finished panel deliver an insulated wall at budget pricing.

2. Light and fast: light panels lift and screw quickly, reducing labor and crane time.

3. Neat finish: tongue-and-groove joint and wide RAL color range give a straight, professional wall.

4. Good insulation: EPS core provides general thermal comfort without the cost of PU or rock wool.

5. Corrosion-resistant skin: PPGI/PPGL faces weather well and need little maintenance.

6. Factory quality: continuous lamination with inspected bond, density and dimensions.

Company Advantages

We are a direct insulated panel manufacturer with automated continuous lamination lines, ISO 9001 and CE support, supplying EPS, rock wool, PU/PIR, glass wool, cold room and cleanroom panels to more than 80 countries. Factory-direct pricing, stock colors and export packing mean contractors get fast, consistent panels.

Service & After-sales Process

Five-stage service: consult with your thickness, color and wall layout and get a quote in 24h; confirm drawings and production details; manufacture with QC photos; strap and pack into containers; install guidance and 24h after-sales support.

FAQ

1. Q: What thickness is available?

A: 50-150mm EPS core, with steel face 0.3-0.8mm and length made to order.

2. Q: What colors and finishes?

A: Any RAL color in smooth, embossed or stucco finish; we match your facade scheme.

3. Q: How is it installed?

A: Panels screw to steel purlins through the tongue-and-groove joint, with matching trims and flashings.

4. Q: Where should it not be used?

A: EPS is not Class-A non-combustible; choose rock wool or PU/PIR for strict fire-rated or high-temperature areas.

5. Q: What is the MOQ and lead time?

A: MOQ is one order from a few hundred square meters; standard colors ship in 7-15 days.

6. Q: Can it be used for roofing?

A: This listing is the wall profile; we also supply matching EPS roof panels with overlapping ribs.

7. Q: How is it packed and shipped?

A: Panels are strapped and edge-protected, loaded into 20GP/40HQ containers with full documents.

8. Q: What warranty and support?

A: Color-coat warranty per the steel spec, spare trims supplied, and after-sales response within 24 hours.

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000