All Categories

Cold Storage Sandwich Panels

Cold Storage Sandwich Panels

Home /  Products /  Sandwich Panels /  Cold Storage Sandwich Panels

Cold Storage Room PU PIR Insulated Sandwich Panel Cam-lock Chiller Freezer Panel

Airtight cam-lock PU/PIR cold room panel, 50-200mm+, smooth food-grade face, for chiller/freezer rooms; MOQ 1 room; strapped; lead time 15-25 days.

  • Overview
  • Specifications
  • Applications
  • Advantages
  • Service & After-sales Process
  • FAQ
  • Recommended Products
Overview

Our cold storage room PU/PIR panel is the airtight, insulated envelope for walk-in chiller and freezer rooms. Two smooth food-grade steel faces bond to a thick closed-cell PU/PIR core, and a precision cam-lock joint seals panels together to eliminate cold bridges and air leakage. The result is a stable low-temperature room that uses less refrigeration energy and stays frost-free.

Produced in 50-200mm+ thickness matched to room temperature — 50-100mm for +5C chillers, 100-150mm for -18C freezers, 150-200mm for -25C deep freezers — with smooth galvanized, painted or stainless faces in 0.4-0.8mm. Wall, ceiling and floor-to-wall details, doors, hinges and cam-locks are supplied as a matched kit. The hygienic easy-clean face suits food and pharma.

As the direct manufacturer, we control foam density, cam-lock tightness and flatness, supplying thermal and food-contact documents and factory-direct pricing. For a stable, hygienic, energy-efficient cold room, the cold storage PU/PIR panel is the standard choice.

The cold room panel is erected on a flat floor by inserting the cam-lock pin into the adjacent panel and tightening with the supplied tool, which pulls the joint tightly together for an airtight seal. Walls go up first, then ceiling panels, then the door and frame, with corner posts and floor-to-wall trim completing the corners. On site, no wet trades are needed: a small crew assembles the room from a kit following the layout drawing, and cutouts for evaporators and lights are made to order. After erection, the refrigeration unit is connected and the room pulled down to temperature; gaskets and cam-locks are checked, and the smooth food-grade face is washed down before first product storage. Our engineers supply the room layout and assembly drawing and advise on gasket and hinge maintenance. With correct sealing, the room holds temperature with minimal energy and frost, and spare gaskets and cam-locks are available for years. The closed-cell PU/PIR cold room panel also keeps humidity out, so chilled and frozen product stays in clean, dry, stable conditions around the clock.

As the direct manufacturer, we produce these panels on our own continuous lamination line, inspect every batch for bond, dimensions and surface finish, and export to more than eighty countries. We accept trial orders and sample panels, quote within twenty-four hours, and support FOB, CIF, CFR, EXW and DDP shipment. Send us your drawing, opening schedule or room requirements and we will return a tailored panel schedule with thickness, width, length, color and the matching accessories, so your project is specified correctly before production begins. Every order is backed by pre-sale consultation, production photos, supervised loading, installation guidance and a dedicated after-sales engineer who responds within twenty-four hours, with spare trim, gaskets and fixings held for reorder. Whether you are a contractor, a distributor or an end owner, you buy directly from the mill rather than through a trading company, which means consistent quality, shorter lead times and honest pricing on every shipment, large or small.

Specifications

Product : Cold Storage Room PU PIR Insulated Sandwich Panel Cam-lock Chiller Freezer Panel

PROJECT SPECIFICATIONS PROJECT SPECIFICATIONS
Model CS-R-100 (cold room) Core PU/PIR closed-cell foam
Thickness 50-200mm+ Joint Cam-lock (eccentric)
Faces Smooth galvanized/painted/stainless 0.4-0.8mm Use Chiller / freezer room
Doors Matched cold room doors Hardware Hinges, cam-locks, gaskets
Hygienic Easy-clean food-grade face Temperature +5C to -25C
MOQ 1 room / few hundred sqm Lead time 15-25 days
Packing Strapped, with hardware Loading 20GP/40HQ
Trade terms FOB/CIF/CFR/EXW/DDP Documents Thermal / food-contact

Applications

The cold room panel suits walk-in chillers and freezers in supermarkets, hotels and kitchens, food processing and pharmaceutical cold areas, dairy and beverage rooms, frozen ingredient storage, and controlled-temperature rooms in distribution.

Advantages

1. Airtight cam-lock: precision joint seals out air and cold bridges for stable temperature.

2. Thick insulation: closed-cell PU/PIR core, 50-200mm+, minimizes refrigeration energy.

3. Food-grade face: smooth, hygienic, easy to clean.

4. Matched to temperature: thickness chosen for chiller or freezer.

5. Modular room: wall, ceiling, doors and cam-locks supplied as a kit.

6. Factory quality: inspected foam, joint tightness and flatness.

Company Advantages

We are a direct insulated panel manufacturer with continuous lamination and die-stamping lines, ISO 9001 and food-contact support, supplying cold room, PU/PIR and other panels to more than 80 countries. Factory-direct pricing and matched door hardware make cold rooms fast and reliable.

Service & After-sales Process

Five-stage service: send room dimensions and temperature and get a design and quote in 24h; confirm panel schedule and doors; manufacture with thermal/food docs; pack with cam-locks; assembly guidance and 24h after-sales support.

FAQ

1. Q: What thickness for my temperature?

A: 50-100mm for +5C chillers, 100-150mm for -18C, 150-200mm+ for -25C freezers; we size to your room.

2. Q: What is a cam-lock?

A: An eccentric metal fastener that pulls panels tightly together for an airtight, cold-bridge-free joint.

3. Q: Are faces food-grade?

A: Smooth galvanized, painted or stainless faces are hygienic and easy to clean for food use.

4. Q: Do you supply doors?

A: Yes, cold room doors, hinges, cam-locks and floor-to-wall details are matched to the panels.

5. Q: Can the room be extended?

A: Yes, panels are modular and the room can be extended or relocated.

6. Q: What is the MOQ and lead time?

A: MOQ is one room or a few hundred square meters; 15-25 days.

7. Q: How is it packed?

A: Panels strapped and edge-protected with cam-locks, hinges and gaskets in containers.

8. Q: What support is provided?

A: Room layout, assembly guidance, spare gaskets and 24h after-sales response.

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000