All Categories

Cleanroom Sandwich Panels

Cleanroom Sandwich Panels

Home /  Products /  Sandwich Panels /  Cleanroom Sandwich Panels

Cleanroom Hand made Wall Panel Honeycomb Rock Wool Modular Cleanroom Wall

Hygienic smooth cleanroom wall panel, 50mm, paper/aluminum honeycomb or rock wool core, aluminum profiles; for pharma/electronics cleanrooms; MOQ 1 cleanroom; strapped; lead time 15-30 days.

  • Overview
  • Specifications
  • Applications
  • Advantages
  • Service & After-sales Process
  • FAQ
  • Recommended Products
Overview

Our hand-made cleanroom wall panel is the hygienic, modular wall for pharmaceutical GMP and electronics cleanrooms. A smooth color-coated or stainless face bonds to a paper honeycomb, aluminum honeycomb or rock wool core, hand-assembled on a jig for square edges and tight joints, and joined with aluminum profiles and rounded corners that leave no dust traps. The wipe-down surface supports GMP cleaning and validation.

Panels are 50mm thick (custom thickness) with smooth hygienic faces in white or custom color, matched to aluminum framing, clean doors, observation windows and pass-through boxes. Hand-made panels offer tight tolerances and flat, square edges ideal for finished cleanrooms. Rock wool core gives fire rating; honeycomb gives a light, flat, cost-effective wall. Cutouts for services are made to order with sealed profiles.

As the direct manufacturer, we assemble panels and fabricate matching doors, windows and profiles in our own workshop, supplying layout drawings and factory-direct pricing. For a hygienic, airtight, validated cleanroom wall, the hand-made cleanroom panel is the standard choice.

The cleanroom wall panel is erected on a floor track, bolted through aluminum vertical profiles and finished with rounded corner trim and sealed gaskets, so every joint is smooth and free of dust traps. Windows, doors and pass-through boxes are set into pre-cut openings and framed with matching aluminum, and services are chased within the wall cavity. On site, panels are cut with clean tools and work is performed from the finished side to keep dust out, following the layout drawing. After erection, the whole wall is wiped down and disinfected as part of validation, and the smooth face tolerates routine cleaning. The system is modular, so walls can be reconfigured as production changes. Our engineers supply layout and finishing drawings and advise on gasket and joint details, so the cleanroom goes up straight, sealed and ready for qualification. This hand-made cleanroom wall panel delivers a smooth, wipe-down surface with no dust traps, and the choice of honeycomb or rock wool core lets each cleanroom balance light weight with fire rating. Because every panel is jig-assembled, wall and ceiling details are square and consistent, which is why pharmaceutical and electronics cleanrooms specify it.

As the direct manufacturer, we produce these panels on our own continuous lamination line, inspect every batch for bond, dimensions and surface finish, and export to more than eighty countries. We accept trial orders and sample panels, quote within twenty-four hours, and support FOB, CIF, CFR, EXW and DDP shipment. Send us your drawing, opening schedule or room requirements and we will return a tailored panel schedule with thickness, width, length, color and the matching accessories, so your project is specified correctly before production begins. Every order is backed by pre-sale consultation, production photos, supervised loading, installation guidance and a dedicated after-sales engineer who responds within twenty-four hours, with spare trim, gaskets and fixings held for reorder. Whether you are a contractor, a distributor or an end owner, you buy directly from the mill rather than through a trading company, which means consistent quality, shorter lead times and honest pricing on every shipment, large or small.

Specifications

Product : Cleanroom Hand made Wall Panel Honeycomb Rock Wool Modular Cleanroom Wall

PROJECT SPECIFICATIONS PROJECT SPECIFICATIONS
Model CR-W-50 (clean wall) Core Paper/aluminum honeycomb / rock wool / PU
Thickness 50mm (custom) Face Smooth hygienic color-coated / stainless
Joint Aluminum profile + rounded corner Doors/windows Clean doors, observation windows, pass-box
Use Pharma/electronics/lab/hospital Finish Wipe-down, disinfectable
Construction Hand-made, jig-assembled Reconfigurable Yes
MOQ 1 cleanroom / few hundred sqm Lead time 15-30 days
Packing Strapped, profiles protected Loading 20GP/40HQ
Trade terms FOB/CIF/CFR/EXW/DDP Drawings Layout + finishing

Applications

The cleanroom wall panel suits pharmaceutical and GMP cleanrooms, electronics and precision manufacturing cleanrooms, laboratories, food hygienic areas, and hospital controlled rooms where smooth, wipe-down, airtight walls are required.

Advantages

1. Hygienic surface: smooth, wipe-down, non-shedding face supports GMP cleaning.

2. No dust traps: aluminum profiles and rounded corners seal joints.

3. Choice of core: honeycomb (light, flat) or rock wool (fire-rated).

4. Tight hand-made: jig-assembled for square edges and tight joints.

5. Matched system: doors, windows and pass-boxes fabricated to match.

6. Modular & reconfigurable: dry-assembled and reconfigurable as needs change.

Company Advantages

We are a direct cleanroom and insulated panel manufacturer with lamination, hand-assembly and metalwork lines and export experience to more than 80 countries. Factory-direct pricing, matched doors/windows and layout drawings support cleanroom projects worldwide.

Service & After-sales Process

Five-stage service: send cleanroom layout and cleanliness class and get a design and quote in 24h; confirm panel and door layout; hand-assemble with QC; pack with profiles; assembly guidance and 24h after-sales support.

FAQ

1. Q: Which core should I choose?

A: Paper/aluminum honeycomb for a light, flat, economical wall; rock wool for fire rating; PU where insulation is needed.

2. Q: What thickness?

A: Typically 50mm, custom thickness available, smooth white or hygienic color.

3. Q: How are joints finished?

A: Aluminum profiles with rounded corners and sealed gaskets to avoid dust traps.

4. Q: Do you supply doors and windows?

A: Yes, clean doors, observation windows and pass-through boxes are fabricated to match the panels.

5. Q: Can it be reconfigured?

A: Yes, modular panels assemble dry and can be moved or expanded.

6. Q: What is the MOQ and lead time?

A: MOQ is one cleanroom or a few hundred square meters; 15-30 days.

7. Q: How is it packed?

A: Panels and profiles strapped, corners protected, with layout drawings.

8. Q: What support is provided?

A: Layout drawings, assembly guidance and 24h after-sales response.

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000