PU PIR Insulated Wall Sandwich Panel High Thermal Efficiency Cladding
High-insulation PU/PIR closed-cell foam wall panel; 50-200mm, low U-value, cam-lock joint; 0.4-0.8mm PPGI; MOQ 1 order; strapped; lead time 10-20 days.
- Overview
- Specifications
- Applications
- Advantages
- Service & After-sales Process
- FAQ
- Recommended Products
Overview
Our PU/PIR insulated wall panel delivers the highest thermal efficiency among wall claddings. Two color-coated steel faces bond to a closed-cell polyurethane or polyisocyanurate foam core on a continuous lamination line, producing a rigid, airtight panel with a very low U-value that cuts heating and cooling cost. The cam-lock or tongue-and-groove joint minimizes thermal bridges, and the hygienic, sealed face is easy to clean.
Produced in 50-200mm thickness, 950mm effective width and any length, with 0.4-0.8mm PPGI/PPGL faces in any RAL color, the panel lets you choose a thinner build for the same insulation than EPS or rock wool. PIR is offered for higher temperature and lower smoke performance. It suits food, pharma, cold-adjacent and energy-efficient buildings where energy cost matters.
As the direct manufacturer, we control foam density, bond and edge seal, supplying thermal-performance documents and factory-direct pricing. For the most energy-efficient, cleanable wall, the PU/PIR insulated wall panel is the premium choice.
The wall panel is fixed to steel purlins with self-drilling screws and matching washers, the high-density closed-cell PU/PIR core giving a rigid, flat, low-U-value face. The tongue-and-groove joint seals tightly and matching trim covers corners and openings, so the facade looks continuous and airtight. On site, panels are cut with standard tools and off-cuts are minimized by ordering exact lengths; because the core is closed-cell, cut edges are sealed to prevent moisture ingress. After erection, the wall needs only an occasional wash-down and delivers low heating and cooling bills for years. Paired with the matching PU/PIR roof panel, the envelope reaches high insulation levels in thinner walls, saving on HVAC capacity. Our engineers review opening schedules and supply the fixing and accessory list, and thermal documents support energy design. With correct flashing, the wall stays straight, sealed and energy-efficient across seasons. The closed-cell PU/PIR foam of this wall panel also gives a higher insulation value in a thinner panel than organic cores, reducing both wall thickness and heat loss throughout the year.
As the direct manufacturer, we produce these panels on our own continuous lamination line, inspect every batch for bond, dimensions and surface finish, and export to more than eighty countries. We accept trial orders and sample panels, quote within twenty-four hours, and support FOB, CIF, CFR, EXW and DDP shipment. Send us your drawing, opening schedule or room requirements and we will return a tailored panel schedule with thickness, width, length, color and the matching accessories, so your project is specified correctly before production begins. Every order is backed by pre-sale consultation, production photos, supervised loading, installation guidance and a dedicated after-sales engineer who responds within twenty-four hours, with spare trim, gaskets and fixings held for reorder. Whether you are a contractor, a distributor or an end owner, you buy directly from the mill rather than through a trading company, which means consistent quality, shorter lead times and honest pricing on every shipment, large or small.
Specifications
Product : PU PIR Insulated Wall Sandwich Panel High Thermal Efficiency Cladding
| PROJECT | SPECIFICATIONS | PROJECT | SPECIFICATIONS |
| Model | PU-W-950 (wall) | Core | PU / PIR closed-cell foam |
| Thickness | 50-200mm | Effective width | 950mm |
| Steel face | PPGI/PPGL 0.4-0.8mm | Joint | Cam-lock / tongue |
| Thermal | Very low U-value | Colors | Any RAL |
| Surface | Smooth, hygienic, cleanable | Use | Cold storage / food / energy-efficient |
| MOQ | 1 order (few hundred sqm) | Lead time | 10-20 days |
| Packing | Strapped bundles | Loading | 20GP/40HQ |
| Trade terms | FOB/CIF/CFR/EXW/DDP | Documents | Thermal / MTC / CE support |
Applications
The PU/PIR wall panel suits cold storage and refrigerated areas, food processing and pharmaceutical rooms, chilled distribution centers, energy-efficient commercial and industrial buildings, and any wall where heating or cooling cost dominates. The hygienic sealed face also suits washable production environments.
Advantages
1. Highest insulation: closed-cell PU/PIR foam gives a very low U-value at minimal thickness.
2. Airtight joint: cam-lock/tongue joint reduces thermal bridges and heat loss.
3. Energy savings: smaller HVAC and lower long-running energy cost.
4. Hygienic face: sealed, smooth surface is easy to clean for food and pharma.
5. Moisture resistant: closed-cell foam resists water vapor transmission.
6. Factory quality: controlled foam density, bond and edge seal with thermal docs.
Company Advantages
We are a direct insulated panel manufacturer with continuous lamination lines, ISO 9001 and CE support, supplying PU/PIR, EPS, rock wool and glass wool panels to more than 80 countries. Factory-direct pricing and thermal documents support energy-efficient and cold-chain projects.
Service & After-sales Process
Five-stage service: consult thickness, PU/PIR grade and color and get a quote in 24h; confirm drawings; manufacture with thermal docs; strap and pack; install guidance and 24h after-sales support.
FAQ
1. Q: PU or PIR?
A: Both are closed-cell high-insulation foams; PIR offers higher temperature resistance and lower smoke, chosen for cold storage and food/pharma.
2. Q: What thickness and U-value?
A: 50-200mm; U-value is far below EPS or rock wool at the same thickness, per the thermal document we supply.
3. Q: What joint?
A: Cam-lock or tongue-and-groove to minimize thermal bridges.
4. Q: Is it hygienic?
A: Yes. The smooth sealed face is easy to clean for food and pharma production.
5. Q: Where is it used?
A: Cold storage, food/pharma, chilled distribution and energy-efficient buildings.
6. Q: What is the MOQ and lead time?
A: MOQ is one order from a few hundred square meters; 10-20 days.
7. Q: How is it packed?
A: Strapped, edge-protected bundles in containers with thermal and quality docs.
8. Q: What support is provided?
A: Installation guidance, spare trims and 24h after-sales response.