Portal Frame Rigid Bent Pre-engineered Steel Column and Rafter
Model: CB-Rigid
Fabricated portal frame bent; Q235/Q355, 15-30m span, end-plate bolted; 25-40 days.
- Overview
- Specifications
- Applications
- Advantages
- Service
- FAQ
- Recommended Products
Overview
Our portal frame rigid bent is the pre-engineered primary steel frame of a building: two steel columns welded to two steel rafters at rigid knee joints, forming a sloped, column-free roof. The rigid frame resists gravity and wind through the moment-resisting knee joints, and bolts together on site without site welding.
Fabricated from Q235 or Q355 steel plate and sections, each bent has end plates at every connection, stiffeners at joints, and a base plate at the column foot. The steel frame members are numbered, trial-fitted and primed, and supplied with erection drawings and bolt sets. Portal frame spans range from 15 to 30 meters or more, tailored to the building.
As a direct steel fabricator, we weld portal frame steel columns and rafters to your roof plan with factory-direct pricing. For a fast, column-free steel building, the portal frame rigid bent is the pre-engineered choice for steel frames.
Each bent is assembled on the ground, then lifted as a unit by two cranes and bolted at the base and ridge. The erector tightens bolts to the specified torque and checks plumb with a line before releasing the crane. Bracing is fitted immediately after each bent is up. Piece numbers on each member prevent mix-up.
As the direct manufacturer and supplier, we process these steel components on our own CNC and roll-forming lines, inspect every batch for dimensions, material and coating, and export to more than eighty countries. We accept trial orders and samples, quote within twenty-four hours, and support FOB, CIF, CFR, EXW and DDP shipment. Send us your drawings, schedules or a typical detail and we will return a tailored quotation with materials, sizes, lengths, quantities and the matching bolts, trims and accessories, so your steel project is specified correctly before production begins. Every order is backed by pre-sale consultation, production photos, supervised loading, erection guidance and a dedicated after-sales engineer who responds within twenty-four hours, with spare parts and certificates held for reorder. You buy directly from the mill and the fabricator, which means consistent quality, shorter lead times and honest pricing on every order, large or small. We also know that a material order is only one part of a successful steel project, so we work with you on scheduling rather than simply sending a quote. We confirm the required delivery window, align production with your erection programme, and advise on how members should be staged on site to avoid damage, corrosion and waste. Our loading teams strap and protect every bundle, check that lengths, piece marks and colors match the packing list, and photograph the container before it is sealed, so what arrives is what was agreed. If a member is damaged in transit, we send a replacement promptly rather than leaving you to source a patch locally. For repeat customers we hold the material batch, grade and piece-mark schedule on file, so a second building on the same development matches the first without a long re-approval process. To help you specify with confidence, every quotation is itemized by section, grade, thickness, length and quantity, so you can compare it line by line against your bill of quantities rather than guessing at hidden add-ons. We also advise on connection details, hole patterns, bolt groups and welding procedures, because even the best steel member will not perform if it is detailed poorly. If you are working to a budget, we can suggest the most cost-effective section and grade that still meets your load and span, rather than simply quoting the smallest option. All material is produced to recognized standards and we provide mill test certificates and coating documentation with the shipment, so your inspector or client can verify what was ordered. Tell us the building, the location and the target date, and we will turn it into a clear, buildable, correctly priced steel component schedule.
Specifications
Portal Frame Rigid Bent Pre-engineered Steel Column and Rafter
| Type / Portal frame rigid bent | Span / 15-30m+ |
| Material / Q235 / Q355 | Connections / End-plate bolted |
| Base plate / Welded | Stiffeners / At joints |
| Finish / Primed | Application / Warehouse / factory |
| MOQ / 1 building | Lead time / 25-40 days |
| Packing / Racked, strapped | Loading / By crane |
| Trade terms / FOB/CIF/CFR/EXW/DDP | Certification / Mill cert + QC |
Applications
The portal frame bent suits warehouses, factories, supermarkets, hangars and any single-story building needing large column-free spans.
Advantages
Column-free: 15-30m spans with no interior columns.
Pre-engineered: shop-fabricated, bolted on site.
Rigid frame: moment-resisting knee joints.
Detailed: end plates, stiffeners, base plates.
Fast erection: numbered members, no site welding.
Factory quality: trial-fitted and primed.
Company Advantages
We are a steel fabricator with CNC cutting and automatic welding lines and export experience to more than 80 countries. Factory-direct fabrication supports pre-engineered building frames.
Service
Five-stage service: send a roof plan and get a layout and quote in 24h; confirm span and loads; fabricate with QC; pack and number; erection guidance and 24h after-sales support.
FAQ
Q: What spans?
15-30m typical, longer on request to suit the building.
Q: What materials?
Q235 or Q355 plate and sections with mill cert.
Q: How is it erected?
Bolted end-plate connections, no site welding.
Q: Do you provide drawings?
Yes, erection drawings and bolt schedules.
Q: Can it carry a crane?
Yes, crane beams can be added for overhead cranes.
Q: What is the MOQ and lead time?
From one building; 25-40 days.
Q: How is it packed?
Racked and strapped, container-loaded.
Q: What support is provided?
Erection guidance and 24h after-sales response.